GROUND RADIO BULLETIN NO. 41 - AUGUST 11, 1952 COMMS. DEPT. L.A.D.
12GLX2/12ACX2 PA GRID METER
Now that practically all 12GLX2/12ACX2 equipment has received modification "N“ (4-250 PA tubes), a long range plan has been started to replace the PA grid meter (0-200 MA) with a smaller scale meter which will read 0-50 MA. This will place the pointer near mid-scale when normal PA grid drive is obtained* The meter is more accurate under these conditions and is also more convenient for recording. Considerable time will elapse before the Division is completed, and the meters will be requisitioned in Miami. When you receive your meters and they have been installed, the old meters should be returned to the Ground Radio Shop following established procedures.
FORM CD70A (9211-2101) DELETION
This form has been used to "explain" requisitions covering items not in the spare parts kit* The form is herewith discontinued, and when requisitioning non-kit items a brief explanation of their use and need should be written on the requisition itself* Where this is not possible - a “Write ItM, or memorandum can be utilized* In the majority of cases a simple notation on the requisition should be sufficient. Separate requisitions should be used for kit items so there will be no confusion between the two types of requisitions, and kit items receive preferred attention.
Whenever an item without a part number is requisitioned it is very important that FULL information as to size, ratings etc. be given. This will give the quickest service.
NC-2-40 RECEIVER - REPLACEMENT OUTPUT TRANSFORMER
Paragraph 1 of Fault Shaker Bulletin No. 38 gives the PAA Part No. of the NC-2-40 UTC type S-15 replacement transformer as 9068-2432. This is in error, please change this number to read 9068-1432.
HAVE YOU REVIEWED THE BACK COPIES OF THE FAULT SHAKER RECENTLY?
FORM 9211—2107